Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

Vehicles, boats, and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices

Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement

Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only

Road vehicles -- Electrical disturbance by conduction and coupling -- Part 3: Vehicles with nominal 12 V or 24 V supply voltage -- Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz

Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

Road vehicles -- Test methods for electrical disturbances from electrostatic discharge

Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 1: Description of test procedures

Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 2: Conformance test for the onboard unit application interface

Electrically Propelled Road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 1: Voltage sub-classes and characteristics

Electrically Propelled Road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 2: Electrical tests for components

Road vehicles -- (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources

Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Reverberation chamber

Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 1: General EMC requirements under typical electromagnetic environmental conditions

Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 2: Additional EMC requirements for functional safety

Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (Up to 15 M), and Machines (Except Aircraft) (50 Hz to 18 Ghz)

Immunity to Radiated Electromagnetic Fields-Bulk Current Injection (BCI) Method

Immunity to Conducted Transients on Power Leads

Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines

Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge

Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields

Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27: Immunity to Radiated Electromagnetic Fields - Mode Stir Reverberation Method

Electromagnetic Compatibility Measurement Procedures for Integrated Circuits-Integrated Circuit EMC Measurement Procedures-General and Definition

Measurement of Radiated Emissions from Integrated Circuits -- Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz

Measurement of Radiated Emissions from Integrated Circuits -- TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)

Vehicle Electromagnetic Immunity--Electrostatic Discharge (ESD)

Electromagnetic Immunity - Off-Vehicle Source (Reverberation Chamber Method) - Part 16 - Immunity to Radiated Electromagnetic Fields

Vehicle Electromagnetic Immunity -- Power Line Magnetic Fields

Function Performance Status Classification for EMC Immunity Testing

Characterization--Conducted Immunity

Radiated Emissions (RE) Narrowband Data Analysis--Power Spectral Density (PSD)

General Specification for Vehicles, Electromagnetic Compatibility (EMC)
Supersedes GMI 12559 R and GMI 12559 V

General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility
Supersedes GMW12559, GMW3100, GMW12002R AND GMW12002V

FMC1278

Electromagnetic Compatibility Specification For Electrical/Electronic Components and Subsystems

FMC1279

EMC Processes

FMC1280

Electromagnetic Compatibility Specification For HV E/E Components and Subsystems

DC-10615

Electrical System Performance Requirements for Electrical and Electronic Components

DC-11224

EMC Performance Requirements -- Components

DC-11225

EMC Supplemental Information and Alternative Component Requirements

DC-11223

EMC Performance Requirements -- Vehicle

Audi TL 82466

Electrostatic Discharge

BMW 600 13.0

Electric- / Electronic components in cars

BMW GS 95002

Electromagnetic Compatibility (EMC) Requirements and Tests

BMW GS 95003-2

Electric- / Electronic assemblies in motor vehicles

Chrysler PF 9326

Electrical electronic modules and motors

FIAT 9.90110

Electric and electronic devices for motor vehicles

Freightliner 49-00085

EMC requirements

Honda 3838Z-S5AA-L000

Noise Simulation Test

Honda 3982Z-SDA-0030

EMC requirements

Hyundai/Kia ES 39110-00

EMC requirements

Hyundai/Kia ES-95400-10

Battery Simulation Tests

Hyundai/Kia ES 96100-01

EMC requirements

IVECO 16-2103

EMC requirements

Electromagnetic Compatibility Requirements for Electrical/Electronic Components and Subsystems

Lotus 17.39.01

Lotus Engineering Standard: Electromagnetic Compatibility

Mack Trucks 606GS15

EMC requirements

MAN 3285

EMC requirements

Mazda MES PW 67600

Automobile parts standard (electronic devices)

Mercedes A 211 000 42 99

Instruction specification of test method for E/E-components

Mercedes AV EMV

Electric aggregate and electronics in cars

Mercedes MBN 10284-2

EMC requirements and tests of E/E-systems (component test procedures)

Mercedes MBN 22100-2

Electric / electronic elements, devices in trucks

Mitsubishi ES-X82010

General specification of environment tests on automotive electronic equipment

Nissan 28400 NDS03

Low frequency surge resistance of electronic parts

Nissan 28400 NDS07

Immunity against low frequency surge (induction surge) of electronic parts

Nissan 28401 NDS02

EMC requirements (instruction concerning vehicle and electrical ...)

Porsche AV EMC EN

EMC requirements

PSA B21 7090

EMC requirements (electric and electronics equipment)

PSA B21 7110

EMC requirements (electric and electronics equipment)

Renault 36.00.400

Physical environment of electrical and electronic equipments

Renault 36.00.808

EMC requirements (cars and electrical / electronic components)

Scania TB1400

EMC requirements

Scania TB1700

Load Dump Test

Smart DE10005B

EMC requirements (electric aggregate and electronics in cars)

Toyota TSC7001G

Engineering standard (electric noise of electronic devices)

Toyota TSC7001G-5.1

Power Supply Voltage Characteristic Test

Toyota TSC7001G-5.2

Field Decay Test

Toyota TSC7001G-5.3

Floating Ground Test

Toyota TSC7001G-5.4

Induction Noise Resistance

Toyota TSC7001G-5.5.3

Load Dump Test-1

Toyota TSC7001G-5.5.4

Load Dump Test-2

Toyota TSC7001G-5.5.5

Load Dump Test-3

Toyota TSC7001G-5.6

Over Voltage Test

Toyota TSC7001G-5.7.3

Ignition Pulse (Battery Waveforms) Test-1

Toyota TSC7001G-5.7.4

Ignition Pulse (Battery Waveforms) Test-2

Toyota TSC7001G-5.8

Reverse Voltage

Toyota TSC7006G-4.4.2

Wide Band-Width Antenna Nearby Test (0.4 to 2 GHz)

Toyota TSC7006G-4.4.3

Radio Equipment Antenna nearby Test (28 MHz ...)

Toyota TSC7006G-4.4.4

Mobile Phone Antenna Nearby Test (835 MHz ...)

Toyota TSC7018G

Static Electricity Test

Toyota TSC7025G-5

TEM Cell Test (1 to 400 MHz)

Toyota TSC7025G-6

Free Field Immunity Test (20 MHz to 1 GHz AM, 0.8 to 2 GHz PM)

Toyota TSC7025G-7

Strip Line Test (20 - 400 MHz)

Toyota TSC7026G-3.4

Narrow Band Emissions

Toyota TSC7203G

Voltage Drop / Micro Drops

Toyota TSC7508G-3.3.1

Conductive Noise in FM and TV Bands

Toyota TSC7508G-3.3.2

Conductive noise in LW, AM and SW Bands

Toyota TSC7508G-3.3.3

Radiated Noise in FM and TV Bands

Toyota TSC7508G-3.3.4

Radiated Noise in AM, SW, and LW Bands

Toyota TSC7203G

Engineering standard (ABS-TRC computers)

Toyota TXC7315G

Electrostatic Discharge (Gap Method)

Visteon ES-XU3F-1316-AA

Electronic Component - Subsystem Electromagnetic Compatibility (EMC) Requirements and Test Procedures

Volvo EMC Requirements

EMC requirements for 12V and 24V systems

Volkswagen VW TL 801 01

Electric and electronic components in cars

Volkswagen VW TL 820 66

Conducted Interference

Volkswagen VW TL 821 66

EMC requirements of electronic components - bulk current injection (BCI)

Volkswagen VW TL 823 66

Coupled Interference on Sensor Cables

Volkswagen VW TL 824 66

Immunity Against Electrostatic Discharge

Volkswagen VW TL 965

Short-Distance Interference Suppression