Transmission Line Parameters of a Narrow Trace Over a Plane

Parameters

Input

Frequency

Hz kHz MHz GHz

Trace Height (h)

cm mm inch mils

Trace Width (w)

cm mm inch mils

Trace Thickness (t)

cm mm inch mils

Conductor Material

Copper custom

Conductivity: σ =

 S/m

Dielectric Material

Air PE PVC custom

Relative permittivity: ε_r =

 

Inductance per unit length

 μH per 

Capacitance per unit length

 pF per  

Resistance per unit length

 mΩ per 

Characteristic Impedance

 Ω

Instructions: Enter the frequency, trace height, trace width and trace thickness. If you want to specify a conductor other than copper, choose "custom" and specify the conductivity of the conductor material. If you want to specify a dielectric other than air, choose one of the other optional materials or choose "custom" and specify the relative permittivity of the dielectric. Click the "Calculate" button to show the calculated transmission line parameters. Per-unit-length parameters are "per meter" if the trace height units are cm or mm. They are "per foot" if the trace height spacing units are inches or mils.

Note: All materials are non-magnetic (i.e. μ = μ₀). Dielectric losses are not modeled.